Label stock

Label sheets that fit Inventori's 30-up sheet

30 labels on US Letter, 8.5 x 11 in, each 1 in x 2-5/8 in. These are the sheets built to that same die. The list is a plain-text reference: in no particular order, with no product links, no affiliate tags and no ranking. Inventori does not endorse any brand or vendor.

Sheets on this die

A sheet is listed once its own published margins and pitch match this die, so it prints aligned at 100 percent. Inventori is not affiliated with any of these manufacturers and does not endorse any brand or vendor; trademark names identify the sheet layout only. This list is a reference, not a recommendation, and carries no product links.

Sheet Labels per sheet Compatibility note
Avery® 5160
2-5/8 in x 1 in on US Letter
30 Same 3 x 10 die as our sheet; the 30-up layout most stock is cross-referenced against.
Avery 5260
2-5/8 in x 1 in on US Letter
30 Same 3 x 10 die as our sheet.
Avery 8160
2-5/8 in x 1 in on US Letter
30 Same 3 x 10 die as our sheet.
Avery 18160
2-5/8 in x 1 in on US Letter
30 Same 3 x 10 die as our sheet.
Avery 94200
2-5/8 in x 1 in on US Letter
30 Same 3 x 10 die; blank stock sold by the sheet.
SheetLabels.com® SL100
2-5/8 in x 1 in on US Letter
30 Side margins 0.188 in, gutter 0.125 in: our geometry within rounding.

Reference: dimensions and print settings

Inventori prints to one geometry: 30 labels on US Letter, 8.5 x 11 in, each 1 in x 2-5/8 in, in 3 columns by 10 rows. The side margins are 0.1875 in, the top and bottom margins are 0.5 in, the gutter between columns is 0.125 in, and there is no vertical gutter between rows. Any sheet built to that die prints aligned.

Print at actual size. 100 percent, scaling off, never fit to page. Fit to page shrinks the sheet inside the dies, which is the most common reason a sheet looks out of line. Peel the labels off the liner; do not cut them, because a cut sheet lifts at the edges and feeds badly on the next pass.

Other sheets are being checked against this die. One appears in the table only once the vendor publishes its own margins and pitch, so that printing at 100 percent lines up. Write to hello@inventori.cloud if you want one checked.